SPYPOINT IR-10 - Manual (Page 13)

24 25
FEATURES
• Still photos 10 MP
• Video resolution 640 x 480
• Photo file JPG
• Video file AVI
• External memory SD/SDHC card up to 32 GB
• Exposure Automatic
• Viewing mode 2.4" viewing screen / Computer
/ TV
• Video output PAL / NTSC
• PIR distance Adjustable from 5 to 50 feet.
• Motion detection angle 30°
• Power source
6 AA-cell batteries or
External 12 volts DC power jack
or Lithium rechargeable battery
pack
• Operating temperature (-20 °C to +50 °C)
(-4 °F to +122 °F)
• Storage temperature (-30 °C to +75 °C)
(-22 °F to + 167 °F)
• Computer operating
system
WIN 2000 / XP / VISTA / WIN 7
/ Mac OS X
KIT INCLUDES
• SPYPOINT IR-10 camera
• Mounting Kit
• USB Cable
• Video Cable
• User’s manual
English
MAIN FEATURES
• TFT 2.4" viewing screen.
• Adjustable PIR sensitivity.
• Color pictures during day; black and white at night.
• Time lapse mode adjustable from 30 seconds to 1 hour
• Adjustable period of operation
• Multi-shot pictures (up to 6 per detection).
• Video length adjustable from 10 to 90 seconds.
• Adjustable delay between motions from 1 to 30 minutes.
• Night-time photos and videos taken with 46 LED.
• Internal camera removable for easier handling.
• Water-resistant housing case.
• Automatic print of date, time, temperature and moon phase on
every picture.
• Auxiliary power jack for external 12 volts DC input.
• Optional use of a solar panel SP-12V to maintain the charge of
the lithium battery pack LIT-C-8 (sold separately, refer to the
section « OPTIONS ») or the 12 volt battery (sold separately,
refer to the section « OPTIONS »)
POWER
The battery level is shown in the bottom right corner of the
screen when the camera is in « TEST » mode. When a single
line remains, the camera will continue to take pictures but we
strongly recommend changing the batteries before they are
empty. (See figure below)
Alkaline batteries
This camera requires the use of 6 AA batteries (1.5V). The
use of alkaline batteries is strongly recommended. Also note
that the voltage of rechargeable AA batteries (1.2V) is
insufficient to power your SPYPOINt camera. During the
installation of alkaline batteries, place the switch inside the
battery case to « ALKALINE ». Insert the batteries as indicated
inside the battery case. Exact polarity must be followed. We
also recommend the use of new batteries to ensure maximum
performance of your camera.
English