SPYPOINT IR-6 - Manual (Page 6)

10 11
English
English
View Date/Time: To increase the view of the date and
time imprinted on the picture.
Erase one: To erase the photo or the video on the
screen.
Erase All: To erase all stored photos and videos,
with the exception of protected photos
and videos.
Format: To format memory card and to erase all
protected photos and videos.
Protect: To protect the photo or video on the
screen.
Language: To select language.
Exit: To return to viewing screen.
New moon:
Waxing Crescent:
First Quarter:
Waxing Gibbous:
Full moon:
Waning Gibbous:
Last Quarter:
Waning crescent:
DELAY
Allows to choose the time interval to wait between each
detection before the camera records the next photo or video.
MULTI-SHOT
To take up to 4 consecutive shots at each detection, with a 10
second delay between each photo. This option is available in
PHOTO mode.
VIDEO LENGTH
Allows you to select the recording duration when the camera is
set in VIDEO mode.
DISTANCE
Turn the dial to the right to increase distance.
The DISTANCE dial (placed on the side of the camera) can
adjust the sensitivity of the detector. The camera is equipped
with a detector sensitive to infrared. The system detects only
heat source in motion. The greater the mass of heat, more
sensitive is the system. Range of detector is between 5 and 50
feet. The best way to adjust the distance is to set the camera
in SET/TEST mode (see MODE). Make sure to have the least
possible objects in front of the camera during the positioning.
This prevents picture taken by the camera when oriented
towards the sun while an object moves in front of the camera
(eg. a branch)
DOWNLOAD TO A COMPUTER
To transfer or view photos and videos on a PC, you must first
turn the camera OFF and connect the USB cable (supplied)
from the camera and to your computer. The computer will
recognize the camera and install the software itself. Click on
"My Computer" and select "Removable Disk". Then click
"DCIM" and "100DSCIM" to find all your photos
and videos.
Taking the SD card out of the camera and inserting it into the
computer port will achieve same results. If no SD reader is built
into the computer, a multi-card reader RD25-1 (sold separately)
can be used.