SPYPOINT IR-A 6mp - Manual (Page 12)

22 23
FEATUrES
• Still photos 6 MP
• Video resolution 640 x 480
• File formats JPG/AVI
• External memory SD card up to 8 GB
• Internal memory 32 MB built-in memory
• Exposure Auto
• Play modes Computer / TV
• TV-out PAL / NTSC
• PIR distance Adjustable from 5 to 45 ft.
• Motion detection angle 95°
• Power source 6 C-cell batteries or
external 12V DC power jack
• Operating temperature (-20 °C to +50 °C)
(-4 F to +122 F)
• Storage temperature (-30 °C to +75 °C)
(-22 F to + 167 F)
• Computer operating system WIN 2000 / XP / VISTA /
Mac OS X
KIT INCLUDES
• SPYPOINT IR-A camera
• Mounting Kit
• USB cable
• Video cable
• User’s Manual
MAIN FEATUrES
• LCD display mode: date, time and number of pictures.
• Adjustable PIR sensitivity.
• Color day time images, black and white night images.
• Multi-shot of 1, 2, 3 or 4 pictures per detection.
• Video length adjustable from 10 to 90 sec.
• Ajustable delay between motions from 4 sec to 30 min.
• NO FLASH-Uses 48 Infrared emitters to illuminate the area.
• Water-resistant housing case.
• Date and time stamp on each picture.
• Auxiliary power jack for external 12 V DC input.
POWEr
Alkaline batteries
This camera requires 6 type “C” batteries. We recommend
the use of good quality alkaline batteries. Install the batteries
according to the instructions inside camera case. Exact polarity
MUST be followed. Battery power is displayed on the LCD
panel. The camera will take pictures even if the batteries are
half full, but we strongly recommended that you replace them
before they are empty. (See figure below)
12V Power
SPYPOINT camera model IR-A can be used with an external
12V DC input. When using 12V DC power, we recommend
removing alkaline batteries to prevent surcharges. A 12V cable
CB-12ft (sold separately) allows connecting the camera to a
12V battery.
English
English