SPYPOINT IR-B 7mp - Manual (Page 13)

24 25
settinGs
Picture Quality, Date and Time
Turn off your camera, set the mode switch to "Test" and set the
power switch to "ON". Press "MENU" once. The default setting
"H" (7MP) icon will flash. Use "DOWN" if you want to change
to "L" resolution (3MP). Press "MENU" button to set date and
time. Use "UP" and "DOWN" to change the blinking number.
Press "MENU" to set next option. Press "OK" and turn off the
system to record the changes. The camera’s internal memory
(32MB) can store approximately 46 pictures in 3MP mode (low
resolution) and 20 pictures in 7MP mode (high resolution). The
SD slot accepts optional SD card to record more pictures.
MODE
When you select "Photo" or "Video", the test
light on the front of the unit will light up for
60 seconds while the motion detector charges
up. When you select "Test" you can set your
system or test the distance setting. The test light on the front of
the unit will light when the camera detects motion. When you
notice how the camera reacts to your motion, you may want
to adjust the distance setting, change the direction or height of
the camera. The camera doesn’t take pictures while in "Test"
mode. When "MODE" switch is set to "View", you can review
the recorded pictures or videos. When "MODE" switch is set to
"View", you can review the recorded pictures or videos.
WORK
Day : Photos or videos daytime only
Night : Photos or videos night-time Tonly
24H : Photos or videos anytime
DELAY
Selects the time the camera will wait before
recording another photo or video. This option
prevents taking too many photos or videos of
the same object should it remain in front of the
camera for a lengthy period of time.
English
12V Power
SPYPOINT camera model IR-B can be used with an external
12V DC input. When using 12V DC power, we recommend
removing alkaline batteries to prevent surcharges. A 12V cable
CB-12ft (sold separately) allows connecting the camera to a
12V battery.
MeMOrY CarD
The SD slot in the SPYPOINT camera model IR-B can accept
optional SD memory cards up to 8GB. Before inserting or
removing the memory card, the camera MUST be turned off.
Failing to do so may cause loss of photos or damage to the
memory card. When the internal memory or the SD card is full,
the LCD panel will show "FULL". The following data shows
an approximate quantity of photos that can be recorded by the
camera depending on the memory card capacity.
English