SPYPOINT IR-C - Manual (Page 13)

24 25
MEMORY CARD
The SD slot in the SPYPOINT camera model IR-C can accept
optional SD memory cards up to 8GB. Before inserting or
removing the memory card, the camera MUST be turned off.
Failing to do so may cause loss of photos or damage to the
memory card. When the memory is full, screen will show
“memory full”. Depending upon the memory card capacity, the
following data shows an approximate quantity of photos that
can be recorded by the camera.
SETTINGS
PhoTo
When selecting photo mode,
the test light on the front of the
camera will blink for 60 sec.
allowingthe operator to walk
away from camera.
VIdeo
When selecting video mode, the test light on the front of the
camera will blink for 60 sec. allowing the operator to walk
away from camera.
TesT
For distance setting, the test light comes ON when the camera
detects a motion. If a motion is present and the light does
not come on, the direction or the level of the camera must be
modified. The camera doesn’t record neither photos nor videos
while in "Test" mode.
English
seT
Allows own operator settings.
To change settings, press "Up" and "down"
on the control button and "ok/Menu" for
selection. To modify selection, press again
"Up" and "down" on control button and
press "ok/Menu" to confirm.
work : Day : Photos or videos daytime only
Night : Photos or videos night-time only
24H : Photos or videos anytime
delay : Selects the time the camera will wait
before recording another photo or video.
This option prevents taking too many
photos or videos of the same object
should it remain in front of the camera
for a lengthy period of time.
Multi-shot : Allows for a 20 second interval
between 4 consecutive photos.
This option shows a different view
of all 4 photos.
Video-length : Selects the video length when the
camera is set in video mode
Language : Selects language, English or French.
date : Sets date : Month / Day / Year
Time : Sets time : Hour / Minute / Sec.
stamp : Selects or cancels imprinting of date
and time on photos.
English