SPYPOINT PRO-X - Manual (Page 15)

28 29
Multi-shot : Allows for a 10 second interval between
6 consecutive photos.
This option shows a different view of all
6 photos.
Video-length : Selects the video length when the camera
is set in video mode
Language : Selects language, English or French.
date : Sets date : Month / Day / Year
Time : Sets time : Hour / Minute / Sec.
stamp : Selects or cancels imprinting of date, time,
temperature and moon phases on photos.
Quality: Increases or decreases photo quality.
Higher photo resolution will lower
memory capacity in memory card.
High = 12MP
Normal = 8MP
Low = 5MP
Continuous: When memory is full, the camera will
continue to record picture by deleting the
first pictures.
Temps.: Select the temperature °F or °C
VIew
To view recorded photos or videos on camera
screen or on a TV set at home.
• Viewing with the 3.0" sCReeN : When camera is set to
View, last photos or videos recorded in camera will appear
on screen. Press “ˮ or “ˮ to view next or previous images.
Press “ˮ to zoom into photos.
English
View
Press “ Ok ˮ to view different options available in View mode.
date and time : Increases size of Date and Time already
imprinted on a recorded photo when it
appears on the screen.
erase : Erases the photo or the video on the screen.
erase all : Erases all stored photos and videos,
exclusive of protected photos and videos.
Format: Formats memory card and erases all
protected photos and videos.
Protect : Protects the photo or the video on screen.
exit : Returns to viewing screen.
• watching on TV : To transfer/project photos and videos on
a TV screen, use the video cable (supplied) and plug in TV/Out
port of camera to Video In of TV set. Viewing screen menu will
also appear on TV screen.
DISTANCE
The distance dial sets the motion detector sensitivity. Use this
feature to set the detection range required. Turn dial to the
right to increase distance. Range of detector is between 5 and
50ft. The best method to determine a proper distance is to turn
the camera to “Set/Test” mode and to walk perpendicularly to
the front of the camera where action is anticipated. When the
detector is activated, the test light on the front of the camera
will blink once. At this moment, the camera operator may want
to adjust the distance setting, and/or change the direction or
height of the camera.
English