P.12), Battery pack (p.12), Power • controller – SPYPOINT TINY-W3 User Manual

Page 12: Blackbox-d/blackbox-4g)

Advertising
background image

12

Power • Controller

(BLACKBOX-D/BLACKBOX-4G)

The battery level is shown in the top right corner of the screen. When a

single line remains, the controller will continue to receive photos but we

strongly recommend to change the AA batteries or charge the lithium bat-

tery pack before they are empty.

AA BATTERIES

The controller requires 6 AA batteries (1.5V). The use of alkaline or lithium

batteries is strongly recommended. During the installation of the AA batte-

ries, slide the battery switch to ALK (i.e. alkaline). Insert the batteries in the

compartment as indicated. Battery polarity must be followed.

Please note that the voltage of rechargeable AA batteries (1.2V) is

insufficient to power the controller. We also recommend the use of new

batteries to ensure maximum performance of your device.

LITHIUM BATTERY PACK

The controller can be powered by a rechargeable lithium battery pack LIT-

09/LIT-C-8 (sold separately, p.44). This type of battery is less affected by

cold temperatures and lasts up to 3 times longer than an alkaline batteries.

During the installation of the lithium battery pack, slide the battery switch

to LIT-09. Insert the lithium battery pack in the compartment as indicated.

EXTERNAL (12V)

The controller can also be powered by an external 12-volt DC input such as

a 12-volt battery (KIT-12V, BATT-12V or KIT6V/12V) or a 12-volt adapter

(AD-12V), each sold separately (p.44). During the installation of a 12-volt

connection, slide the battery switch to ALK (the AA batteries can remain

safely inside the controller). If combined with a lithium battery pack, slide

the battery switch to LIT-09. For available accessories, see p.44.

SOLAR PANEL

The controller also offers the possibility to connect a solar panel (SP-12V

sold separately, p.44) to maintain the charge of the lithium battery pack

(sold separately, p.44). While installing the rechargeable lithium battery

pack, slide the battery switch to LIT-09 to activate the charging system of

the solar panel.

Battery switch position (depending on the power source)

Power source

Battery switch position

• 6AA

• 12V

• 12V + 6AA

ALK

• LIT-09

*

• 12V + LIT-09

*

• Solar panel + LIT-09

*

LIT-09

*

Rechargeable lithium battery pack, sold separately (LIT-09) or with a

charger (LIT-C-8).

6 alkaline AA batteries

Lithium battery pack

LIT-09/LIT-C-8

Advertising
This manual is related to the following products: