STEMCO HandBAT RF - Manual (Page 4)

5/29/2012 Page 4
If you press the up ( ↑ ) arrow key, and the HandBAT does not succeed in resetting the trip, error
messages will be given with the option to try again. When the trip is reset the reset is logged into
memory for later download.
To select the Fluid Entry option press the right ( → ) arrow key. The following screen will be
shown if this option is chosen.
The fluid quantities are entered by using the up ( ↑ ) or down ( ↓ ) arrow keys on each selected
digit. When the desired entries are completed:
Press Enter
Select Save selection
Press Enter.
A beep will sound confirming the save.
Note: The data will be not be stored if the screen is exited without saving.
HandBAT Navigation Tips:
Return to the Main menu by depressing the MAIN key.
Return to the previous screen press the BACK key.
Access Help screen (additional directions) by depressing the HELP key.
NOTE: If this instruction manual differs from the on screen help always refer to the HandBAT on-
screen help.
READING AirBAT sensors