STEMCO Aeris - Manual (Page 13)

Aeris Installation and Service Manual
Page 13 of 42
1. Axle
2. Torpedo Level
3. C-Clamp
4. Drilling Fixture
Note:
Before drilling any holes in axle make sure they will
not interfere with any suspension components or
brake components. Contact STEMCO for technical
assistance at 903-758-9981 in U.S.A.
Figure 5
Axle Manufacturer Type Location A Location B
Hendrickson
INTRAAX /
VANTRAAX
See Figure 6 See Figure 6a
Hendrickson TRIAXLE See Figure 7 See Figure 7
SAF Holland See Figure 8 See Figure 8
AXN See Figure 7 See Figure 7
AXN Trax-Pro 50 See Figure 9 See Figure 9
Meritor See Figure 7 See Figure 7