BT Diverse 1015 User Manual
Page 46
Setting the access pause
You can insert a pause or change the length of
a pause to suit different access codes.
The handset must be switched ON.
•
Press the
STO
button.
•
Press #.
•
Press the
1
button
•
Enter the system code. (Factory setting is
0000. To change it see page 16.) Each digit
you enter erases one dash on the display.
•
Press the
LNR
button.
•
Enter one of the three-digit codes above to
set the length of pause you want.
•
Press the
STO
button to confirm.
Code
PAUSE
0 2 4
1 second
0 2 5
2 second
0 2 0
3 second
0 2 1
6 second
2 5 3
To clear all
access codes
43
Using your Diverse 1015
with a switchboard
If you are experiencing problems, please call the
Diverse Helpline on 0345 908070.
To insert an access code
The handset must be switched ON.
•
Press the
STO
button.
•
Press the # button.
•
Press the
0
button.
•
Enter the system code. (Factory setting is
0000. To change it see page 16.) Each digit
you enter erases one dash on the display.
•
Press the
LNR
button.
Display shows
A –-
–-
–-
.
•
Enter the access code (for example
9
).
If you want to enter additional access codes,
press
LNR
again, followed by the next code,
and so on.
•
Press the
STO
button to confirm.
Notes
•
You can store RCL,
✱
, and
#
as well as the
digit keys 0-9.
•
You can enter up to three PBX access codes, each
one to three digits long.
•
You may find it useful to enter 144 (for BT
Chargecard access) as one of the access codes,
together with an access pause of six seconds – see
‘Setting the access pause’ opposite.
STO
0
LNR
STO
1
LNR