Bose Acoustimass 6 - Manual (Page 13)

AM189815_04_V.pdf December 20, 2001 13
Figure 13
The module end cover fits over
the cables
Setting Up
Attach the module end cover, if needed
The module end cover is designed to hide the cabling and extend the smooth, clean lines of
the Acoustimass
® module. However, because the cover has a beveled surface, you cannot
stand the module on that end with the cover in place.
If you plan to use the cover, attach it to the cable end after all connections have been
checked (Figure 13). Gently push the end cover into the grommets on the Acoustimass
module.
Your set up is complete. Enjoy your Acoustimass-6 speaker system.