Summit SCFF495 - Manual (Page 10)

Cleaning the Fan Blades and Motor:
If necessary, clean the fan blades and motor with a soft cloth. If it is necessary to
wash the fan blades, cover the fan motor to prevent moisture damage.
SAFETY WARNINGS
Pay close attention to the safety notices in this section. Disregarding
these notices may lead to serious injury and/or damage to the unit.
Unplugging the Cord:
 To minimize shock and fire hazards, do not plug or unplug the cord with wet
hands.
 Before performing maintenance or cleaning, be sure to unplug the unit.
 After unplugging the unit, wait at least 10 minutes before re-plugging it. Failure
to do so could cause damage to the compressor.
 If the unit will not be in use for a long period of time, unplug it from the outlet.
Attention:
 To minimize shock and fire hazards, do not overload the electrical outlet.
Designate one outlet for your unit.
 Do not use extension cords.
 Do not put your hands under the unit when the unit must be moved.
 To minimize shock and fire hazards, make sure the unit is properly grounded.
Warning!
 Do not attempt to remove or repair any component unless instructed by the
manufacturer.
 Make sure the unit is not resting on or against the electrical cord or plug.
 To minimize personal injury, do not hang on the doors.
 Do not store any flammable or explosive gases or liquids inside the unit.
 Do not attempt to alter or tamper with the electrical cord.
9