Summit FF1116W - Manual (Page 5)

4
Technical Information
Models: FF1116W (white)
FF1117BL (black)
FF1158SS (black cabinet
with stainless steel door)
Capacity: 10.3 cubic feet
Electrical Input: 115V AC / 60Hz
Rated Current: 1.6A
Energy Consumption: 313 kWh/yr
Energy Star approved: Yes
Refrigerant: R134a, 5.3 oz
Installation: Free-standing
Shipping Weight: 166 lbs
Unit Dimensions: 23.63"W x 26.0"D x 58.88"H
Installation Instructions
Before Using Your Appliance:
• Remove the exterior and interior packing.
• Check to be sure you have all of the following parts:
 2 wire shelves
 1 crisper drawer with clear cover
 1 ice cube tray
• Before connecting the unit to the power source, let it stand for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system
from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
Installing the Appliance:
• This appliance is designed to be free-standing only, and should not be
recessed or built in.
• Place your unit on a floor that is strong enough to support it when it is fully
loaded. To level your unit, adjust the leveling legs at the bottom.
• Allow 5 inches of space between the back and sides of the unit, which will
allow the proper air circulation to cool the compressor and condenser.
• Locate the unit away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources