Summit SWCD40 - Manual (Page 10)

- 10 -
Troubleshooting
You can solve many common wine cellar problems easily, saving you the cost of a possible service
call. Try the suggestions below to see if you can solve the problem before calling the service center.
PROBLEM POSSIBLE CAUSE
Wine cellar does not operate. Not plugged in.
Incorrect voltage supply.
Circuit breaker tripped or fuse blown.
The wine cellar does not get cold
enough.
Check the temperature control setting.
External environment may require a higher setting.
The drawers are opened too often.
The drawers are not closed completely.
Vibrations Check to be sure the wine cellar is level.
The wine cellar seems to make too
much noise.
The wine cellar is not level.
Check the fan.
The door will not close properly. The wine cellar is not level.
The shelves are out of position.
LED does not display. Main control board does not work.
PCB Problem.
There is a problem with the plug.
LED display error Actual temperature is out of range.
Buttons are not functional. Temperature controller panel is damaged.
If you still have a problem with your wine cellar, call our SUMMIT Service Center
toll-free at 1-800-932-4267.