Summit GC424BGL - Manual (Page 8)

7
When the appliance is connected to electrical power by a socket:
•
Fit a standard plug suited to the load indicated on the data label to the cable.
•
Fit the wires following Fig. 5, noting the following correspondences:
Letter L (live) = wire
Letter N (neutral) = wire
Ground symbol = green or yellow-green wire
•
Never use adapters or shunts for connection since these could create false
contacts and lead to dangerous overheating.
•
The outlet must be accessible after the cooktop is built in.
When the appliance is connected directly to the electrical main:
•
Install an omnipolar circuit-breaker between the appliance and the electrical
main. This circuit-breaker should be sized in compliance with local installation
regulations.
•
Remember that the ground wire must not be interrupted by the circuit-breaker.
•
For optimum safety, the electrical connection may also be protected by a high-
sensitivity differential circuit-breaker.
You are strongly advised to fix the yellow-green ground wire to an efficient
grounding system
Fig. 5