Regency CI2600 Large Wood Insert - Manual (Page 14)

CI2600/HI400 | wood insert
14 | installation
OPTIONAL BACKING PLATE INSTALLATION
An optional backing plate is available in either a standard or custom
size.
1. The backing plate is packaged in three pieces and requires assem-
bly. The legs of the backing plate are attached to the top plate with
2 screws on each side. See diagram 1 below.
Diagram 1 Leg
Top plate
Diagram 2
Flush front face of
backing plate
Diagram 3 Screws
Diagram 4
Completed backing plate shown with Optional Hampton faceplate
2. The pointed end of the screws should be facing the front of the back-
ing plate.
3. Slide assembled backing plate over unit. Line up fl ange on backing
plate with fl ange on unit and secure with 2 screws from the underside
as shown below.
Proceed with Faceplate install.
Backer Plate