Regency Hampton GC60 Large Pellet Stove TECHNICAL MANUAL - Manual (Page 12)

figure 10: Corner installation.
Installation
m
obile
h
ome
i
nStallation
:
(76mm)
3"
(76mm)
3"
Wall thimble
manufactured by pellet
vent manufacturer
3"Fresh Air Intake
Optional Hearth Pad
Flooring
Steel Frame
Ground Wire Directly to Metal Chassis
1/4"Lag Bolts
Securely Fastened
● Secure the heater to the floor
using the four (4) holes in the
pedestal.
● Ensure the unit is electrically
grounded to the chassis of your
home (permanently).
● Do not install in a room people
sleep in.
● Outside fresh air is mandatory.
Secure outside air connections
directly to fresh air intake pipe
and secure with three (3) screws
evenly spaced.
● All specified components must
be used. Do not use any
components other than what’s
specified.
CAUTION: THE STRUCTURAL INTEGRITY OF THE MANUFACTURED HOME FLOOR, WALL
AND CEILING/ROOF MUST BE MAINTAINED.
c
orner
t
hrough
W
all
i
nStallation
:
figure 9: Mobile home installation.
Hampton GC60 Cast Pellet Stove Technical Manual 12