Talos Security DRD800 DVR Manual - Manual (Page 41)

40
▪ AREA SETUP
In the Area setup, the highlighted square is shown at the left top side of the screen. Press enter and the
active area will be change to Green. Cover desired areas with active green color for motion detection.
NOTE : When the highlighted square is red you can freely move the selector to the desired area.
When the status active green color you can add or delete motion detection areas.
After setting the motion area select the MENU button to save your selection.
▪ SELECT ALL : Select all motion area.
▪ CLEAR ALL : Clear all motion area.
▪ SAVE : Save the changed setting.
▪ CLOSE : Close the pop-up screen.
▪ EXIT : Exit the motion area setup.