Telematrix SP550 - Manual (Page 34)

34
Transferring Caller Log Records into Phonebook Memory
1. Be sure the LCD display is in the beginning position and no feature is in use.
A call record must be stored into the caller log prior to using this feature.
2. Press the “UP” or “DOWN” key to locate the incoming caller name and
number from the caller log.
3. To activate EDIT MODE, press any key on the keypad. Use the “DELETE”
key to delete a digit or use the keypad to add a digit.
4. Press the “PhBook” key to store the number. The LCD will display “PLEASE
WAIT” and will add the record into memory. If the record is already in
memory, the display will read “REPEAT PHBOOK”.
5. Press “DISC” to exit or “STORE” to continue programming.
Phonebook Programming
(Automatic Programming of Records)
The Spectrum PLUS
TM Telephone Phonebook Feature allows for 100 name and num-
ber records for frequently dialed calls. This section describes the Phonebook pro-
gramming using existing Caller ID records that are in the Caller ID record storage.
•
Programming must be done with the power adapter plugged into the wall.
•
Programming can be performed with the telephone on-hook.
•
A maximum of 32-digits can be entered into ENTER NUMBER and 12-characters into ENTER NAME.
•
You must be subscribed to a telephone service providers Message Waiting System to receive Caller ID
records.