Brother ETHERNET QL-580N User Manual
Network user’s guide
Advertising
NETWORK
USER’S GUIDE
Multi-Protocol On-board Ethernet Print Server
QL-580N / 1060N
Read this guide thoroughly before using the machine. Keep the
CD-ROM in a convenient place so you can use it quickly if you
need to.
Visit us atere you can get product
support, the latest driver updates and utilities, and answers to
frequently asked questions (FAQs) and technical questions.
Version 0
EN
Advertising
Table of contents
Document Outline
- Definitions of warnings, cautions, and notes
- Trademarks
- Compilation and publication notice
- IMPORTANT NOTE:
- Brother Numbers
- Table of Contents
- Introduction
- Configuring your network printer
- Network printing from Windows®: basic TCP/IP Peer-to-Peer printing
- Network printing from Macintosh®
- Driver Deployment Wizard (Windows® only)
- Troubleshooting
- Appendix A
- Using services
- Other ways to set the IP address (for advanced users and administrators)
- Using DHCP to configure the IP address
- Using BOOTP to configure the IP address
- Using RARP to configure the IP address
- Using APIPA to configure the IP address
- Using ARP to configure the IP address
- Using the Telnet console to configure the IP address
- Using the Brother Web BRAdmin server software for IIS* to configure the IP address
- Appendix B
- Appendix C