Therma-Tru Doors Repair and Replacement - Manual (Page 9)

Repair and
Replacement
SITE 5 2014 5.9
Sidelite Slab Replacement
Seal Perimeter
Apply 1/4” bead of (Elastomeric or
Polyurethane) sealant around entire
perimeter on jamb and/or mullion stops.
Inswing Sill
Apply a generous amount of
(Elastomeric or Polyurethane)
sealant at joints where sill and
jamb/mullion meet.
Apply a 1/4” bead of (Elastomeric
or Polyurethane) sealant
approximately 1” above
weatherstrip kerf, 6” long.
Head
Sealant
Sealant
Sealant
Mullion
Mullion system shown
Outswing Sill
Apply a 1/4” bead of
sealant on saddle surface that
contacts door face.
.
(Elastomeric or Polyurethane)
Apply a generous amount of
sealant at joints where sill and
jamb/mullion meet.
Apply a 1/4” bead of (Elastomeric
or Polyurethane)sealant approx
1” above weatherstrip kerf, 6”
long.
Inswing
Outswing
Weatherstrip
channel