Titus RAB IOM - Manual (Page 8)

RAB Installation Manual
IOM-RAB-00 08-15-04
8 of 10
Figure 11. Motor Calibration
Roof Curbs
Roof curb assemblies require field assembly and are
shipped separately, knocked down. Select a level and
structurally adequate location to support the combined
weight of the roof curb, air handler, and plenum. The
following table provides a list of components for a roof curb
installation. Figure 13 serves as a reference diagram for roof
curbs.
Preparation
• Upon receipt of materials, check shipping container for
damage. If damaged, contact shipping carrier.
• Place roof curb kit on roof deck for assembly.
• Unpack roof curb package and check contents against
packing list.
• Sort contents, especially fasteners, nuts, and bolts
according to size and type.
Note: Wood or fiber strips, roofing felts, roofing
materials, caulking, adhesive gasket material, and curb
to roof fasteners are field supplied.
Figure 12. Roof Curb Assembly Diagram