Ultralife MRC-135A - Manual (Page 8)

MRC-135A Operation Manual
Newark, New York | 315-332-7100 | Fax: 315-331-7800
©2012 Ultralife Corporation • www.ultralifecorp.com • All information is subject to change without notice.
The information contained herein is for reference only and does not constitute a warranty of performance. • 19 DEC 2012 Rev: C
4 MAINTENANCE
Maintenance for the MRC-135A is described in the following sections.
4.1 Serviceable Parts
The MRC-135A has NO user serviceable parts. Units requiring repair should be sent to
a qualified service depot for repair, or follow instructions in the maintenance chapter of
this manual.
4.2 Cleaning
Cleaning of the MRC-135A is described in the following sections.
4.2.1 Dirt and Dust
All external components to the MRC-135A can be cleaned with a water dampened non-
abrasive cloth and allowed to air dry or wipe dry with a clean dry non-abrasive cloth.
4.2.2 Oils and Grease
All external components of the MRC-135A can be cleaned with a mild soap/water
solution dampened non-abrasive cloth once the power source has been removed.
Rinse with water dampened non-abrasive cloth and allowed to air dry or wipe dry with a
clean dry non-abrasive cloth.
4.3 Corrective Maintenance
The MRC-135A has NO user serviceable parts. Units requiring corrective maintenance
should be sent to McDowell Research for repair. Contact information is provided in the
next chapter.