General overview, Flare-up control, Helpful hints – Broilmaster R3BN-1 User Manual

Page 20: Nfrared, Ooking

Advertising
background image

Page 20

B101278-6-0610

i

nfrared

C

ooking

General Overview

Broilmaster Infrared gas grills make it possible for you to

enjoy cooking outdoors quickly and effortlessly. In minutes,

you can enjoy steaks, hamburgers, poultry, pork chops, fish

and other foods. You can also cook more slowly if you wish.

Broilmaster's optional accessories are designed to enhance

your grill's versatility.

Infrared Searing Method

Searing is a process that seals juices in food by cooking

with intense heat for a short period of time. The juices stay

in the food where they belong and the outside gets coated

with flavorful smoke. For best results, follow these proce-

dures when cooking.

Searing Method

1. Follow the Burner Ignition procedures and operate the

grill for 5 minutes or until the burners glow uniformly.

2. Set the Burner Output Knob to HIGH and place the

food on the cooking grid for 1 - 2 minutes, or until food

lifts without sticking.

3. Turn the food and repeat Step 2.
4. Depending upon your taste, continue cooking on HIGH,

turning the food frequently, or adjust the Burner Output

Knob to a setting between LOW and "medium" and

continue cooking until the food is cooked to your satis-

faction. Turn as necessary (generally every one to three

minutes).

During the searing period, flashing might occur when juices

vaporize on contact with the cooking grid and burner sur-

faces. The flashes and smoke greatly enhance the flavor of

food.
The intense infrared energy generated by your Broilmas-

ter Grill has other advantages. For example, food is evenly

cooked throughout. Also, upon contact with the cooking

grids and burners, drippings vaporize into flavorful smoke

that cooks back into the food.

Flare-Up Control

NOTICE: NEVER DOUSE A FLARE-UP WITH

LIQUID. IT WILL DAMAGE THE BURNER AND

VOID THE WARRANTY!
To minimize flame flare-ups:

• Trim excess fat from meat.

• Reduce heat and reposition foods away from flare-ups

when the occur.

• Prevent excess grease build up by periodically cleaning

cooking grids.

Helpful Hints

1. Use the proper tools. Long handled tongs, spatula,

knife, and mitts or a hot pad for handling hot items.

When turning or moving foods, use tongs or a spatula,

instead of a fork. Piercing the food with a fork allows

the natural juices and flavor to escape.

2. Monitor meat temperature. Bring large cuts of meat,

roasts, or fowl to room temperature before cooking.

Smaller meat cuts such as hamburgers, hot dogs, or

small steaks may be cooked directly from the refrig-

erator. Note: Broilmaster does not recommend cooking

portion meats from a frozen state.

3. Start slowly. Infrared grilling is unlike other outdoor

cooking methods. It may take time to get used to the

fast cooking process. As a benchmark, foods which

generally cook in 20 minutes or less on conventional

grills cook in about one-half the conventional time on

a Broilmaster infrared grill. Please refer to the Infrared

Cooking Sample Times on page 21.

Indirect Cooking with a Broilmas-

ter Infrared Grill

Indirect cooking is a slower process used to prepare large

main dishes - roasts, hams, turkeys, etc. Foods are placed on

one side of the grill and the other side is lighted to produce

heat.
To protect the infrared burner from damage, place a heavy-

duty disposable aluminum pan over the burner to catch

drippings. Note: Make sure the aluminum pan is the same

size or larger than the infrared burner. Any liquids that land

on the burner while it is not burning may cause it to break

when ignited.
The pan may be filled part-way with liquid (water, mari-

nade, etc.) to enhance the moisture content of the meat, but

take special care not to spill anything onto the burner when

adding liquids or when removing the pan after cooking.

Advertising