Brother IntelliFAX 4100e - Manual (Page 95)

M A K I N G C O P I E S 11 - 1
11
11
Making Copies
Using Your Machine as a Copier
You can use your machine as a copy
machine, making up to 99 copies at a time.
The machine can stack the copies or
collate (sort) them.
The scannable area of your Brother
machine begins at approximately
one-sixth inch (4mm) from the edge
of the paper.
Making a Single Copy
1
Place the original face down in the ADF.
2
Press Copy.
Do NOT pull on the paper while copying is in progress.
Making Multiple Copies
1
Place the original face down in the ADF.
2
Use the dial pad to enter the number of copies you want (up to 99).
3
Press Copy.
Incoming faxes cannot be received on paper or into memory while the machine
is copying.
Note
To Stop the copy process, press Stop/Exit.
To release the original document, press Stop/Exit again.
To sort the copies, use the Options key.
(See
Using the Options Key , page 11-4.)
Not
Scannable
area
1/6" (4mm)
1/6" (4mm)