Unisteer 8000510 Ford Cross Steer 1935-1940 - Manual

pg. 1 655570
1935-1940 Ford Cross Steer Rack & Pinion
# 8000510
Full refund will NOT be granted to any kits that are damaged,
scratched, or altered in any fashion.
Kit Contents:
# Part Number Description Quantity
1 410410 18” Rack 1
2 400470 Rack Housing 1
3 541860 Rack Stop 1
4 390230 Short 90” Pinion 1
5 240510 Tie Rod End Tube 1
6 8020300 Cross Steer Mounting Bracket 1
7 120430 3/8”-16 Nut 4
8 200840 3/8” Lock Washer 4
9 200850 5/16” Flat Washer 4
10 230660 3/8”-16 x 1” Bolt 4
Please review the following before installation

This product is intended for use on 1935-1940 Fords.
 This kit will only work with stock or 2” drop axles.

This kit will only work if your chassis has split wishbones at least around the transmission.

This kit mounts to your frame, where the factory steering box was.

If using the factory steering column, you will have to modify it in order to connect to the pinion

New steering u-joints are required.