UVP Life Science - Manual (Page 4)

UVP L IFE S CIENCE S OFTWARE
- 4 -
4. If the Application Data folder is not
present in the All Users window, go to
the Tools menu and select Folder
Options. (If the Application Data is
present, proceed to step 6)
5. A Folder Options window appears.
On the View tab, select Show hidden
files and folders. Select Apply and
then OK.
6. Go to the UVPSettings folder inside the Application Data folder.
7. Have the System Administrator select Allow for all permissions listed for each user or
group for either the UVPSettings folder or for each file within the folder (depending on
the Network Security Policy where the LS Software will reside).
8. Repeat steps 3-7 for C:\Program Files\UVP.
R EGISTER THE S OFTWARE
LS Software must be activated by entering an activation code provided by UVP in order to gain
full access rights to the software.
Once the LS Software is installed, it will operate in full-feature trial mode for 14 days. Within the
14-day trial mode, the LS Software must be registered with UVP. Otherwise, the software will only
operate in demonstration mode after the 14-day trail period. The demonstration mode limits the
software to only open and use the demonstration images provided by UVP. Refer to the steps
below to register the software.