Victorio VKP1101 Hand Crank Ice Shaver - Manual (Page 4)

Using Your VICTORIO® Ice Shaver
CAUTION: Your Victorio® Ice Shaver has a sharp stainless steel blade &
ice spikes that can cut and cause injury. Keep fingers clear from blades and
avoid contact at all times when using and cleaning.
Before Use
 Wash machine in warm, soapy water. DO NOT wash in dishwasher.
 To prepare ice blocks, fill ice molds with water and place in freezer.
When frozen solid, loosen ice block by holding the ice cup in your
hand for a few seconds. (Be sure to make extra ice blocks and store
them in the freezer for future use). Ice cubes may also be used.
How To Use
1. Place a prepared ice block (or ice cubes) in the ice chamber. Position
an empty ice cup or small bowl underneath to catch the shaved ice.
2. Remove the ice spike cover from the lid assembly. Place the lid assem-
bly onto the ice chamber, press down and twist lid clockwise until
tight. Turn handle clockwise and apply downward pressure to shave
ice and produce “snow”.
3. Place “snow” in a paper cone or glass, then add your favorite
Victorio® Snow Cone syrup or beverage to create your own frosty
treat.
4. When ice block or cubes are completely shaved, empty out any re-
maining ice pieces and add a new ice block or cubes to make more
shaved ice.
5. After each use, shake out any water or ice particles remaining in the
machine. It is not necessary to wash the machine after using ice made
only from water. However, after using flavored ice, wash and dry
thoroughly. Do not wash in dishwasher. When assembling, disman-
tling, or cleaning, always be careful not to touch the blade or ice
spikes.
3