Vortex Optics RAZOR RED DOT — 3 MOA Dot - Manual

Rugged, compact and 110% reliable, the Razor ® red dot is
designed from the ground up to enable rapid and accurate
short/mid-range shooting under the most stressful and
harshest of field conditions.
Down Arrow
Power Off
Decrease Brightness Elevation
Adjustment
Dial
Windage
Adjustment Dial Windage and Elevation
Adjustment Lock Screw
Up Arrow
Power On
Increase Brightness
Low Mount Base
with Lock Screw
Battery
Compartment
Protective Cover
Protective Cover
C
ONTROLS
Remove cover when using or adjusting the Razor red dot.
Please note that installing the cover does NOT shut the
Razor off.
Battery
To install or replace the battery, gently pry the
battery tray out from the body. Install the new
battery with the positive (+) side facing upwards.
Push the battery tray back in so it is flush with the
body.
Battery Compartment
CR 2032
Battery
To turn the Razor on, press the Up Arrow. To turn off,
press and hold the Down Arrow for five seconds.
Powering Up
Adjust the illumination instensity using the
appropriate arrow button:
Brightness Adjustments
Down Arrow
Press and hold
to power off. Up Arrow
Press the arrow
to power on.
• Tap the Up Arrow to increase brightness.
• Tap the Down Arrow to decrease brightness.
Note: The Razor red dot
automatically shuts down
in six hours.
The Razor features adjustable elevation and windage dials with
1 MOA clicks.
Note: The adjustments are
protected by a lock screw which
must be loosened with the hex
wrench before any adjustments
are made.
To adjust the elevation and
windage settings:
Windage and Elevation Adjustment
1. Loosen the Adjustment Lock Screw 1 1/2 turns.
2. Turn adjustment dials in the appropriate Up/Down or
Left/Right direction as indicated by arrows.
3. Re-tighten lock screw after making adjustments.
Lock Screw
Elevation Dial
Windage Dial
One click yields one MOA of adjustment.
One MOA = 1.05 inches @100 yards.
1 2
3 4 5