Waring Pro TCO600 - Manual (Page 7)

7
OPERATING INSTRUCTIONS
Preparing To Use your Convection Toaster Oven
for the First Time
If you are using your Convection Toaster Oven for the first time,
please be sure to:
• Remove any stickers from the surface of the oven.
• Open oven door and remove all printed documents and paper
from inside the Convection Toaster Oven.
• Clean the oven rack and baking pan with hot water, a small
amount of dishwashing liquid and non-abrasive cleaning pad.
• Do not immerse the body of the unit in water or dishwashing
liquids.
• Dry the unit thoroughly before using.
• Select a location for the Convection Toaster Oven. The location
should be in an open area on a flat counter where the plug will
reach an outlet.
• Plug the Convection Toaster Oven into a 120-volt outlet.
We recommend a “trial run” at a high temperature to familiarize
yourself with your oven and to eliminate any protective substance
or oil that may have been used for packing and shipping. Set the
Temperature control to 400 (degrees), the Timer control to 15
minutes and the Function control to Bake to activate the oven
heating element. After the first 10 minutes, switch the
Temperature control to 450/Broil to activate the upper and lower
heating elements. A small amount of smoke and odor may be
detected in your oven during this trial run. This is normal.
Warning:
When the Convection Toaster Oven is in use or
cooling down, please be sure there is a 6-inch (15cm) clearance
between the Convection Toaster Oven and any other surface,
including cords. Be sure the cord is not resting against the back
of the Convection Toaster Oven.