Waring Pro CC150 - Manual (Page 7)

7
FIGURE 1
OPERATING INSTRUCTIONS
1. Set the motor base on a stable and level surface.
2. Connect plug to a power source.
3. Make sure floss head is in position.
4. Switch on the cotton candy machine to preheat
5 minutes. NOTE: It is very important that you preheat
the cotton candy maker the full 5 minutes.
5. Switch off the cotton candy machine. Add 1 scoop of
sugar mixture into the floss head.
CAUTION: Floss head will be extremely hot. Never
touch floss head while unit is on. After use, allow floss
head to cool for 30 minutes before touching
or removing.
6. Turn unit to ON position.
7. Use plastic cone
to roll the cotton
candy up (see
Fig. 1). Roll from
right to left in a
continuous motion.
Do not touch the
floss head as you
roll, as the head
is very hot and
will cause floss
to burn. Continue
rolling, evenly
distributing the cotton candy onto the cone.
8. Cotton candy may be made in consecutive batches.
If unit is turned off for an extended time, it must be
reheated for 5 minutes.
9. Do not use sugar cubes or liquid sugar when making
cotton candy.