Waring Pro SCM100 User Manual

Page 3

Advertising
background image

3

CONTENTS

Important Safeguards ................................................................. 2
Power Cord Instructions ............................................................... 3
Before First Use ............................................................................ 3
Operation ..................................................................................3-4
Helpful Hints ................................................................................ 4
Parts ............................................................................................. 5
Safety Features ............................................................................ 5
Cleaning and Maintenance ........................................................... 6
Recipes ....................................................................................6-9

POWER CORD INSTRUCTIONS

The Waring Pro

TM

Snow Cone Maker has a polarized plug (one

blade is wider than the other). To reduce the risk of electric shock,

this plug will fit in a polarized outlet only one way. If the plug does

not fit fully in the outlet, reverse the plug. If it still does not fit,

contact a qualified electrician. Do not modify the plug in any way.
This appliance is for 120 volts only and should not be used with

a converter.

BEFORE FIRST USE

1. Carefully unpack your Waring Pro

TM

Snow Cone Maker.

Remove plastic bags from all parts of the unit. Be sure that

the unit has not been damaged during transport.

Do not

leave plastic bags around children.

2. Rinse the snow bin with water and a non-abrasive cleanser,

and then dry thoroughly.

OPERATION

1. Place unit on a flat, sturdy surface where it will not be

knocked over.

2. Check ice chute for presence of foreign objects before

plugging in. WARNING: DO NOT TOUCH BLADE.

3. Insert the removable snow bin onto the main housing. An

interlock safety feature will prevent the unit from turning on

if not properly in place.

4. Be sure that the toggle switch is set to the Off position and

plug into an outlet.

Advertising