Wasp Barcode WLS8600 Product Reference Guide - Manual (Page 76)

Enter Configuration Exit and Save Configuration
М$+;О
CODE SELECTION
М$-?О
CODE 128 FAMILY
disable the family
МAI0]О
 Read the desired family code
 Code 128
МAI11=О
control without transmission of
check digit
ISBT 128
EAN 128
ÌAI31CÎ
enabling ISBT 128 automatically
disables Puzzle Solver™.
МAI21@О
control without transmission of
check digit
Transmit GS Before Code
Code EAN 128 uses the ASCII <GS> character to separate a variable length code field from the
next code field. This character can also be transmitted before the code.
 disable
ÌEQ0qÎ
enable
ÌEQ1tÎ
If the <GS> character has been modified in the Character Replacement parameter, the new
character is affected by this command.
CODE LENGTH (optional)
The code length selection is valid for the entire Code 128 family and is calculated on the
output string.
Read the code +
4 numbers for the code length where: set code length
First 2 digits = minimum code length.
Second 2 digits = maximum code length.
ÌAILJÎ
The maximum code length is 99 characters.
The minimum code length must always be less than or equal to the maximum.
Examples:
0199 = variable from 1 to 99 digits in the code. 1010 = 10 digit code length only.
70