WASPcam RC Watch User Manual

Rc watch, Product overview fcc statement, Radiation exposure statement

Advertising
background image

PM

MODE/SLEEP

SE

T

PM

12H

24H

Product Overview

FCC Statement

Modifications not approved by the party responsible for compliance
could void user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits
for Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio or television reception, which can be determined by turning the
equipment on and off.
The user is encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure

Statement

The product comply with the FCC portable RF exposure limit set forth
for an uncontrolled environment and are safe for intended operation
as described in this manual. The further RF exposure reduction can be
achieved if the product can be kept as far as possible from the user
body or set the device to lower output power if such function is
available.

RC Watch

Quick Start Guide

SET

SETUP

OK

BINDING

RF

SEL

OK

STOP

SET button

PHOTO button

Charging port

MODE/SLEEP

button

Charging Battery

When the battery power is running low, do the following to charge the
battery:

1. Open the charging port cover.

2. Connect one end of the Pogo cable to

the charging port of your watch.

3. Connect the end of

the Pogo cable to
the USB port of
a computer or
AC adapter to
charge battery.

LEFT button

VIDEO button

RIGHT button

Clock Mode

In this mode, this watch can be used as a clock, stopwatch, countdown
clock, and alarm clock.

Set Date and Time

1. Press and hold the SET button to enter the setting mode.

2. Press the RIGHT button repeatedly to

select the field that you want to adjust.

3. Use the VIDEO or PHOTO button to

adjust the value or set time format or the
color of the LED clock display.

4. Repeat steps 2-3 to adjust other fields.

5. Press the SET button to save your changes.

Stopwatch

1. Press the LEFT button repeatedly to switch to

Stopwatch mode.

2. Press the VIDEO button to start the timer.

3. To record a lap while the timer is running,

press the RIGHT button. It displays the last
lap time.
• Repeat this step to create a new lap. You can

record up to 12 laps.

4. To stop the timer, press the VIDEO button.

5. To reset the timer, press the SET button.

Countdown Clock

1. Press the LEFT button repeatedly to switch to Countdown Clock

mode.

2. To start the countdown, press the VIDEO

button.

3. To pause the countdown, press the VIDEO

button.

• To resume, press the VIDEO button

again.

• To reset the countdown, press the SET button.

Setup Mode

In this mode, it allows to pair with a camera, set auto power off,
enable/disable sound, and adjust the brightness setting.

Pair with Camera

1. On your camera, press the Mode button

repeatedly to change to SET mode.

2. Press the Shutter button to enter SET mode.

3. Press the Mode button to highlight MORE. Then press the Shutter

button to enter the MORE menu.

4. Press the Mode button to highlight BINDING.

5. Press the Shutter button to enter the BINDING submenu. The

camera RF antenna is enabled and ready for pairing.

6. On your RC watch, press the MODE button

to switch to Preview mode.
Then press and hold the SET button to
enter to SET mode.

7. Use the LEFT or RIGHT button to

select Pairing and press the VIDEO button
to enter Pairing menu.

8. Use the LEFT or RIGHT button to select the

preview window that you want to pair with
your camera and press the VIDEO button
to start pairing.

9. When pairing is complete, press the SET

button to return to SET mode. Then press
the SET button to switch to Preview mode.

10. Repeat Step 7~9 to add more cameras. You can pair up to 6 cameras.

Alarm Clock

1. Press the RIGHT button repeatedly to switch

to Alarm Clock mode.

2. To activate an alarm, press the VIDEO button

to select ON.

To set the countdown time, do the following:

a. Press and hold the SET button. Then

press the RIGHT button repeatedly to
select the field that you want to adjust.

b. Use the VIDEO or PHOTO button to

adjust the value.

c. Press the SET button to confirm.

To set the alarm time, do the following:

a. Press and hold the SET button. Then

press the RIGHT button repeatedly to
select the field that you want to adjust.

b. Use the VIDEO or PHOTO button to

adjust the value.

c. Press the SET button to confirm.

To unpair or remove the paired camera, do the following:

a. In SET mode, use the LEFT or RIGHT

button to select Pairing and press the
VIDEO button to enter Pairing menu.

b. Use the LEFT or RIGHT button to

select the assigned preview window
that you want to unpair.

c. Press the VIDEO button to confirm.

Set Auto Power Off

1. Press the MODE button to switch to Preview mode.

Then press and hold the SET button to enter to SET mode.

2. Use the LEFT or RIGHT button to select

Auto off and press the VIDEO button to
enter Auto Power Off menu.

3. Use the LEFT or RIGHT button to select

the desired setting and press the VIDEO
button to confirm.

Enable/Disable Sound

1. Press the MODE button to switch to Preview mode.

Then press and hold the SET button to enter to SET mode.

2. Use the LEFT or RIGHT button to select

Sound and press the VIDEO button to enter
Sound menu.

3. Use the LEFT or RIGHT button to enable/

disable sound and press the VIDEO button
to confirm.

Adjust Brightness Level

1. Press the MODE button to switch to Preview mode.

Then press and hold the SET button to enter to SET mode.

2. Use the LEFT or RIGHT button to select

Bright and press the VIDEO button to enter
Brightness menu.

3. Use the LEFT or RIGHT button to select the

brightness level and press the VIDEO button
to confirm.

Number color

Time format

PM

ON

PM

Pairing

OK

Pairing

1

2

3

4

5

6

1

2

3

4

5

6

Pairing

AutoOff

sec

OK

Bright

OK

Sound

OK

Specifications

General
Function

Remote control

Living View

Basic time function: Time, Stopwatch ,Timer, Alarm

Working Range 3m
RF Module 2.4GHz
IO Terminals

PoGo pin USB

Status OLED

1.29”, 128.96 dot

Power Source

Polymer Battery 370mAh, 3.7V dc

Stream Format Motion JPEG 128*96 pixel, 8fps
Video Aspect 4:3
Ratio

Power Saving

Auto Sleeping in 5/10/30/60s/never

Charging Time Approx. 2 hours

Battery Life

Living living view continuously: 1.5 hours

Time without sleeping: 6 hours

Standby time in sleeping mode: up to 6 months

Troubleshooting

Problem

Possible Cause

Solution

A black screen
appears on the
screen and all
buttons are inactive.

The screen appears
unusually and all
buttons are inactive.

The battery is running
out.

The watch is shutting
down.

The micro SD card is
not inserted.

The battery is running
out.

Connect pogo cable
and the battery will
start charging after 10
seconds.

Connect the end of the
Pogo cable to the USB
port of a computer.
After 10 seconds, the
watch will restart.

Insert a micro SD card
into camera card slot.
(Note: If you use
internal memory to
record video, the live
view will disappear
when you start
recording.)

Connect the pogo
cable to charge battery.

Live View Mode

When the devices are paired, the live view appears on the screen and
you can use this watch as a remote control to record videos or capture
photos.
1. Press the MODE button to switch to Preview mode. The live view

appears on the screen.

2. Do the following:

• To record videos:

Press the VIDEO button to start recording.
Press the VIDEO button again to stop video
recording.

• To capture photos:

Press the PHOTO button.

1

1

(orange) - card full
(blue) - recording
(gray)- standby (already
connected to camera)
(black)- disconnected

Live view icon indicators

Video button and Photo button in Live view mode

RC Watch

Video Button

Photo Button

Video

Photo

Burst

Time Lapse @ video

Time Lapse @ photo

Self Timer

Looping

Set up/Wi-Fi…

Note: With PIV (Photo In Video) feature, you can take a photo when you
are recording a video.

Video

Video

Video

Start/Stop

Start/Stop

Video

Looping start/stop

Video

Photo

Note: “PIV” is available when
camera is recording.

Photo

Burst

Photo

Note: PIV is available when
camera is processing Time
Lapse @video.

Photo

Self Timer

N/A

Photo

Action Cam Mode

Advertising