How to use manual figures, Technical information, Engine components – Briggs & Stratton MS-5158-5/03 User Manual

Page 3: Hazard symbols and meanings, International symbols and meanings, Safety precautions

Advertising
background image

Document: - page 1 (Black)

Screen angle and frequency: 45.0000, 150.0000

GB

GB

1

Note: (This note applies only to engines used in the U.S.A.) Maintenance, replacement or repair of the emission control devices and systems may be performed

by any nonroad engine repair establishment or individual. However, to obtain no charge repairs under the terms and provisions of the Briggs & Stratton

warranty statement, any service or emission control part repair or replacement must be performed by a factory authorized dealer.

How To Use Manual Figures



-

refer to figures inside covers.

-

refer to engine components in figure



.

К

-

Т

refer to part/action in figures.

19

1

Record your engine Model, Type and Code numbers

here for future use.

Record your date of purchase here for future use.

In the state of California, OHV Model Series 290000,

300000 and 350000 engines are certified by the

California Air Resources Board to meet emissions

standards for 250 hours. Such certification does not

grant the purchaser, owner or operator of this engine

any additional warranties with respect to the perforĆ

mance or operational life of this engine. This engine is

warranted solely according to the product and emisĆ

sions warranties stated elsewhere in this manual.

Technical Information

POWER RATINGS: The power ratings for an individual

engine model are initially developed by starting with

SAE (Society of Automotive Engineers) code J1940

(Small Engine Power & Torque Rating Procedure) (ReĆ

vision 2002Ć05). Given both the wide array of products

on which our engines are placed, and the variety of enĆ

vironmental issues applicable to operating the equipĆ

ment, it may be that the engine you have purchased will

not develop the rated horsepower when used in a piece

of power equipment (actual onĆsite" power). This difĆ

ference is due to a variety of factors including, but not

limited to, the following: differences in altitude, temperĆ

ature, barometric pressure, humidity, fuel, engine luĆ

brication, maximum governed engine speed, individual

engine to engine variability, design of the particular

piece of power equipment, the manner in which the enĆ

gine is operated, engine runĆin to reduce friction and

clean out of combustion chambers, adjustments to the

valves and carburetor, and other factors. The power

ratings may also be adjusted based on comparisons to

other similar engines utilized in similar applications,

and will therefore not necessarily match the values deĆ

rived using the foregoing codes.

Engine Components

(see fig.



)

1 Air cleaner

2 Carburetor cover

3 Finger guard

4 Starter rope

5 Blower housing

6 Oil filter, if equipped

7 Spark plug wire

8 Rotating screen

9 Fuel pump

10 Spark arrester, if equipped

11 Exhaust manifold

12 Engine Model

Type

Code

xxxxxx xxxx xx xxxxxxxx

13 12V electric starter, if equipped

14 Oil fill/Dipstick

15 Oil drain plug

Hazard Symbols and Meanings

Explosion

Toxic Fumes

Moving Parts

Shock

Hot Surface

Kickback

Fire

International Symbols and Meanings

On Off

Fuel Shutoff

Read Owner's

Manual

Stop

Fuel

Choke

Safety Alert

Oil

Safety Precautions

* Briggs & Stratton does not necessarily know what

equipment this engine will power. For that reason,

you should carefully read and understand the

operating instructions for the equipment on which

your engine is placed.

BEFORE OPERATING ENGINE

• Read entire Operating & Maintenance Instructions

AND the instructions for the equipment this engine

powers.*

• Failure to follow instructions could result in serious

injury or death.

THE OPERATING & MAINTENANCE

INSTRUCTIONS CONTAIN SAFETY

INFORMATION TO

• Make you aware of hazards associated with engines
• Inform you of the risk of injury associated with those

hazards, and

• Tell you how to avoid or reduce the risk of injury.

The safety alert symbol is used to identify safety

information about hazards that can result in personal injury.
A signal word (DANGER, WARNING, or CAUTION) is used

with the alert symbol to indicate the likelihood and the potential

severity of injury. In addition, a hazard symbol may be used to

represent the type of hazard.

DANGER indicates a hazard which, if not avoided,

will result in death or serious injury.

WARNING indicates a hazard which, if not avoided,

could result in death or serious injury.

CAUTION indicates a hazard which, if not avoided,

might result in minor or moderate injury.

CAUTION

,

when used without the alert symbol,

indicates a situation that could result in damage to

the engine.

The engine exhaust from this product contains

chemicals known to the State of California to cause

cancer, birth defects, or other reproductive harm.

WARNING

Advertising