Troubleshooting – Western Digital My Book World Edition II (blue rings) User Manual User Manual

Page 25

Advertising
background image

MY BOOK WORLD EDITION

USER MANUAL

TROUBLESHOOTING – 22

Troubleshooting

To search the WD technical support knowledge base and to view a complete list of
FAQs for your product, visit our support Web site at

support.wdc.com

.

Q: Why can't WD Anywhere Access find My Book World Edition?

A: If you encounter one of the screens above, do one or more of the following:

Check power LED

—ensure that the My Book World Edition is powered on and

that the power LED (outer ring) illuminates blue steadily.

Check connections

—make sure you have connected an Ethernet cable from the

My Book World Edition Ethernet port to a network switch or an open port on your
router.

Check the IP address and your router settings

—make sure that your computer

and the My Book World Edition IP addresses are listed in the same subnet.

Q: Why does the device not power up?

A: Make sure the power cord and power supply are connected correctly and

securely. After connecting the power cord, the device takes approximately 30
seconds to spin and power up. The area surrounding the button illuminates blue
when the drive is ready.
If using a power strip or a UPS (uninterruptible power supply), unplug the My
Book World Edition power cord and connect it directly to a power outlet.

Q: Why is the device not recognized under “My Computer” or on the

computer desktop?

A: Make sure WD Anywhere Access is installed and running.

Q: What if I have forgotten or misplaced my password?

A: For the My Book World Edition, use the recover button to revert to the default

password. See “Recovery Button” on page 5. For WD Anywhere Access, click
the

Forgot username and password

link in the sign in screen (see “Signing In”

on page 13) and follow the instructions as prompted.

Q: Why does the interface report “failed drive” even after the bad drive is

already replaced?

A: The system detects the new drive in the device as failed until the new drive is

formatted. Refer to “Format New Internal Drive” on page 43 for instructions.

8

Advertising
This manual is related to the following products: