Format new internal drive, Safely remove the device – Western Digital My Book World Edition II (blue rings) User Manual User Manual
Page 46
Advertising
MY BOOK WORLD EDITION
USER MANUAL
APPENDIX A - SHARED STORAGE MANAGER – 43
Format New Internal Drive
If the Drive Status message in the upper right corner of Shared Storage Manager
indicates that one of the drives in the device has failed, follow the instructions in
“Replacing a Drive” on page 19. Then, select this option to format the new drive.
1. Click
Format New Internal Drive
.
2. The replacement drive is detected by Shared Storage Manager. Click
Format
New Internal Drive
.
3. Once format is complete, device status should indicate "OK." The device status is
located in the upper right corner of the screen.
Safely Remove the Device
1. Click
Safely Remove USB Drive
.
2. You may now safely disconnect the external USB drive.
Advertising
This manual is related to the following products: