Western Digital WD Arkeia RAx300T Installation and Configuration Guide - Manual (Page 13)

WD Arkeia Physical Appliance Installation and Configuration Guide
7
Remote SSH access: allows remote access to the file system through
a console command.
Click “Next”.
3.4.1.4 Step 4: Network
Configure a static IP address of the appliance.
CAUTION: WD strongly recommends that you assign a static IP
address to all Appliances and Backup Servers. Using DHCP
Servers to assign IP addresses to Appliances or Backup
Servers can cause unexpected grief.
Assign the networking parameters of your environment including DNS name
servers.