5 step 5: email (smtp) server – Western Digital WD Arkeia RAx300T Installation and Configuration Guide User Manual
Page 14
Advertising

8
WD Arkeia Physical Appliance Installation and Configuration Guide
Click “Next”. IP address and machine name changes do not take effect until the
appliance is restarted. A reboot is required before proceeding to the next step.
Click "Finish"
3.4.1.5 Step 5: email (smtp) server
To receive backup reports and system alerts, provide parameters to configure
your email (smtp) server. Note that SSL and TSL authentication to an email
(smtp) server are not supported. The following parameters are required:
email (smtp) server name
email (smtp) server port
The following optional parameters are required if your mail server requires
authentication:
user name
password
Advertising
This manual is related to the following products: