Western Digital WD Arkeia R620 Installation and Configuration Guide - Manual (Page 19)

Arkeia Physical Appliance Installation and Configuration Guide 13
4.2.2. Adding Users
Arkeia Physical Appliance users are individuals who can log in and perform
various backup tasks. Note that a “User” is the lowest grade of appliance users.
There are three user categories:
Name Privileges
Arkeia Application Users are independent of system users at the OS level. To
add users, navigate to
Configure  Users
4.2.3. Adding Clients
The appliance communicates over the LAN with clients. Clients are computers
that have the Arkeia Backup Agent software installed on them.
Before a client can be made known to the Arkeia Physical Appliance, forward
and reverse Name Resolution must be setup and verified via external DNS or
the Arkeia Physical Appliance and the Clients Host files.
1. Cross populate the "hosts" files on both the Arkeia Physical Appliance
and on the client machines.
Edit the “hosts” file of the client machines to list the IP address, fully
qualified domain name (FQDN), and any alias for the Arkeia Physical
Appliance.
EXAMPLE: LINUX AND UNIX
vi /etc/hosts
127.0.0.1 localhost.localdomain localhost
192.168.5.120 fileserver1.us.arkeia.com fileserver1
192.168.5.38 appliance.us.arkeia.com appliance
EXAMPLE: WINDOWS 2008
Use any text editor (e.g. notepad) to edit the following file:
c:\winnt\system32\drivers\etc\hosts