Connecting the device and getting started, Connecting the device – Western Digital My Book VelociRaptor Duo User Manual User Manual
Page 10
Advertising
MY BOOK VELOCIRAPTOR DUO
USER MANUAL
CONNECTING THE DEVICE AND GETTING STARTED
– 6
Connecting the Device and Getting Started
This chapter provides instructions for:
Connecting the Device
Installing the WD Drive Utilities Software
Connecting the Device
1.
Depending on your region, if required, change the AC adapter as follows:
2.
Turn on your computer.
3.
Connect the AC adapter to a power receptacle and to the 12 VDC power connector
on the device:
1
2
Installing
Removing
Installing
Removing
Advertising