Western Digital My Book Elite User Manual User Manual
Page 24
MY BOOK ELITE
USER MANUAL
CONNECTING THE DRIVE AND GETTING STARTED
– 19
6. The WD SmartWare Virtual CD Manager utility locates your My Book drive and
displays its current and target VCD settings:
7. Click Configure Drive to continue.
8. As prompted, for your change to take effect, you must power cycle your My Book
drive:
a. Disconnect the USB cable from your drive.
b. Either disconnect the AC power adapter cable or press the power button to off.
c. Wait ten seconds.
d. Either reconnect the AC power adapter cable or press the power button to on.
e. Reconnect the USB cable to your drive.
9. Click Exit to close the WD SmartWare Virtual CD Manager utility.
10. Check your Windows Explorer and My Computer Devices with Removable Storage
listings to confirm the change.