Western Digital My Book Studio/Studio LX User Manual - Manual (Page 57)

MY BOOK STUDIO AND STUDIO LX
USER MANUAL
USING THE DRIVE WITH WINDOWS – 52
Installing on Windows Vista or Windows 7 Computers
To install your My Book Studio or Studio LX drive on a Windows Vista or Windows 7
computer:
1. After physically connecting the drive as shown in Figure 4 on page 8, click Cancel to
close the Found New Hardware screen:
Note: The WD SmartWare software will install the appropriate driver for the drive.
2. Two or three screens might appear, depending on your computer setup:
3. AutoRun (AutoPlay) enabled—Click Run WDSmartWare.exe on the AutoPlay
screen:
IF AutoRun (AutoPlay) is . . . on your computer, THEN . . .
Enabled Proceed to step 3.
Disabled Skip to step 5.