Step 7 o – Western Digital My Passport Essential SE User Manual User Manual
Page 14
MY PASSPORT ESSENTIAL AND ESSENTIAL SE
USER MANUAL
CONNECTING THE DRIVE AND GETTING STARTED
– 9
and skipping the backup.
7.
After password protecting or registering your drive, click Finish to close the drive
management initial Drive Settings screen.
This completes the getting started procedure after selecting Install Drive Settings.
In this case:
•
Opening the WD SmartWare software displays the drive management Home
screen (see Figure 8 on page 11) with the Settings tab for performing all drive
management functions (see “Customizing Your Drive Settings” on page 34).
•
Clicking the Settings tab displays the drive management Drive Settings screen
with a Preferences button that you can use to enable the WD SmartWare
Backup and Retrieve functions (see Figure 16 on page 26 and “Enabling the
Backup and Retrieve Functions” on page 38)
.
Figure 5. Initial Backup Screen