Brother MFC-7225N - Manual (Page 31)

4 - 6
4
8
You must now enter the actual IP address of the print/scan server and the print/scan server name. If you
have edited the hosts file on your computer or are using Domain Name System, you can also enter the
DNS name of the print/scan server. As the print/scan server supports TCP/IP and NetBIOS names, you
can also enter the NetBIOS name of the print/scan server. The NetBIOS name can be seen in the
network configuration page. The NetBIOS name assigned is the first 15 characters of the node name
and by default it will appear as
BRN_xxxxxx where xxxxxx is the last six digits of the Ethernet address.
Note
• The node name and the NetBIOS name is printed on the Network Configuration Page. To learn how
to print the Network Configuration Page, see Printing the Network Configuration Page on page 3-7.
• If you search for the device using the search function in Step 8 above, disable the Personal Firewall
software if you are using it. Once you are sure that you can print, re-start your Personal Firewall
software.
9
Click OK. When prompted you must re-boot your computer.
Associating to the printer
You must now create a printer on your Windows ® system using the standard Windows ® printer setup
procedure.
1
To do this, go the Start button, select Settings and then Printers.
2
Double click the Add Printer icon to get the Add Printer Wizard.
3
Click Next when you get the Add Printer Wizard window.
4
Select Local Printer when you are asked how the printers are connected to your computer, and then
click Next.
5
Select the desired printer model. If the correct model is not displayed, click the Have Disk option and
insert the CD-ROM supplied with your machine.
6
If you have selected a printer driver that is already being used, you have the option of either keeping the
existing driver (recommended) or replacing it. Select the desired option and click Next.
7
Select the Brother LPR port (the port name you assigned in step 7 of the Installing the Brother
Peer-to-Peer software on page 4-5) and click Next.
8
Enter any desired name for the Brother printer. For example, you could call the printer “Networked
Brother Printer”. Select Yes or No if you want this driver to be default printer, and then click Next.
9
Windows ® will now ask you if you wish to print out a test page, select Yes and then select Finish. You
have now finished installing the Peer-to-Peer Print (LPR) software.