Western Digital My Passport Slim User Manual - Manual (Page 45)

MY PASSPORT SLIM
USER MANUAL
RETRIEVING FILES – 40
4. On the Select a destination for retrieved files dialog:
Created multiple backup
volumes on the selected
retrieve source
(backup target) device
from either:
• Different internal hard
drives or hard drive
partitions on the
backup source device
• Different backup
source devices
Select a volume to retrieve from dialog with the available
volumes listed in the Backed Up Volumes selection box:
In this case:
a. In the Backed Up Volumes selection box, select the
volume that you want to retrieve files from.
b. Click Next to display the Select a destination for
retrieved files dialog.
c. Proceed to step 4.
Not run a backup on the
selected
retrieve source
(backup target) device ,
The Select a volume to retrieve from dialog with nothing listed
in the Backed Up Volumes selection box:
You cannot retrieve files from a device that does not have a
backup volume. Click the Home tab and return to step 2 on
page 38 to select the
device that has the files you want to
retrieve.
IF you want to copy your
retrieved files to . . .
THEN select the . . . option.
Their original locations on the
selected retrieve destination
(backup source) device, To the Original Places
Note: The To the Original Places option is not available if
you selected a backup volume from a different
backup source device or a remote Dropbox folder
at step 3 on page 39.
A retrieved content folder, To a Retrieved Content Folder
The default folder is Retrieved Contents in the My
Documents folder for your user name.
If you want to specify a different folder:
a. Click Browse and use the browse function to
identify the new folder.
b. Click Apply.
IF you have . . . THEN the WD SmartWare software displays the . . .