Western Digital WD Dual-Option Media Center User Manual - Manual (Page 7)

WD DUAL-OPTION MEDIA CENTER AND COMBO EXTERNAL STORAGE PRODUCTS
USER MANUAL
GETTING STARTED – 3
Recording Your WD Product Information
CAUTION: Do not remove, tear, or damage the tape seal or any labels on the
product; these actions will void the warranty.
In the following table, write the serial number and model number of your new WD product
found on the large label on the back panel. Also, write the purchase date and other notes such
as your operating system and version. This information is necessary for setup and technical
support.
Registering Your WD Product
Your WD product includes 30 days of free technical support during the applicable warranty
period for your product. The 30-day period commences on the date of your first telephone
contact with WD technical support.
Register online at https://www.westerndigital.com/en/products/registration.
Handling Precautions
CAUTION: This product contains no user-serviceable parts. Refer servicing only
to authorized WD personnel or a WD-approved service center.
WD products are precision instruments and must be handled with care during unpacking and
installation. Drives may be damaged by rough handling, shock, or vibration. Be aware of the
following precautions when unpacking and installing your external storage product:
!
Do not drop or jolt the drive.
!
Do not move the drive during drive activity.
!
Do not use the drive as a portable device.
!
Do not open the product, as this will void the warranty.
!
To allow proper ventilation, do not block air slots on the underside, top, or rear of the
enclosure. Do not stack any objects on top of the drive that may block ventilation.
WD Product Serial Number:
WD Product Model Number:
WD Product Purchase Date:
System and Software Notes: