Western Digital My Book Pro Edition II User Manual - Manual (Page 8)

MY BOOK PRO EDITION II
USER MANUAL
CONNECTING THE DEVICE – 5
Connecting the Device
Macintosh ®
1. Turn on your computer.
2. Insert the software CD into the CD-ROM drive.
3. Double-click the CD-ROM drive icon, the My Book drive icon, then the Mac
folder, which contains the software for this device.
4. Double-click My Book RAID Manager to install this program into the
Applications folder.
5. WD Button Manager Software disk image contains the installer required to enable
the capacity gauge and Safe Shutdown ™ . Double-click this icon to install the
program into the Applications folder.
6. If you want to install the backup software now, double-click the EMC ®
Retrospect ® Express icon in the Mac folder and follow the instructions as
prompted.
7. Connect the unit’s power cord and interface cable (USB, FireWire 800, or
FireWire 400) as shown above, after which the unit mounts to the system.
3