WINGITS MODERN Towel Bar WMETBPSxx - Manual

Technical Data Sheet
Toll Free: 877-894-6448 • www.wingits.com • [email protected]
WMETBxx
WMETBPS18
18” Polished Stainless Steel
WMETBPS24
24” Polished Stainless Steel
WMETBPS30
30” Polished Stainless Steel
WMETBPS36
36” Polished Stainless Steel
Towel Bar
MODERN Elegance ™
MECHANICAL DATA
PRODUCT COMPOSITION
MODALITY
INSTALLATION
RECOMMENDED INTEGRATION
Model:
Part Numbers:
Stainless steel screws are included to install into
adequate structural blocking.
Width: xx” (See product part number for width)
Complete length of Towel Bar is usable surface.
Projection: 3” (7.6cm)
Entire product is 18/8 (304) stainless steel. Solid caps and pins are HeliArc welded to 18 gauge
tube.
W ING I TS ®
MODERN Elegance ™ Towel Bars are designed to be installed into adequate
structural blocking or with W ING I TS ®
Master Anchor Fasteners for MODERN Elegance ™ Bath
Accessories (MAWME35).
Use: Wall Installation. Load Capability: 200 lbs. (90.7kg)
For hollow wall construction, it is recommended that W ING I TS ®
Master Anchor Fasteners for
MODERN Elegance ™ Bath Accessories (MAWME35) are used with this product. See Fastener
instructions for applications.
Contemporary design combines with PATENTED BridgeBind ™ Technology
resulting in a Towel Bar with:
• Unparalleled strength
• Beauty
• Functionality
• Durability
• No lines for dirt to collect
(maintenance free)
BridgeBind ™ Technology is the result of drilling a hole completely through stainless steel
tubing, inserting a solid stainless steel pin, and HeliArc welding the pin to the far point of
the tube; solidifying the pin and tube into one piece. Creating the ultimate structural bond.