Blaupunkt CD50 - Manual (Page 9)

10
➮
Press
:
to select the desired
volume level.
➮
Once you have made your selec-
tion, press MENU
8
or OK
;
.
Adjusting the volume of the
beep
For a number of functions you will hear
a beep if you press a key for longer than
2 seconds, e.g. if you want to store a
radio station on a station preset. You can
adjust the volume level of this beep.
➮
Press MENU
8
.
➮
Press
:
repeatedly until
“BEEP” appears in the display.
➮
Press
:
to adjust the volume.
“0” means the beep volume is off,
“9” means the beep volume is ad-
justed to the maximum volume.
➮
Once you have adjusted the set-
tings, press MENU
8
or OK
;
.
Radio operation
Switching to the radio mode
If you are currently using the CD player
or CD changer,
➮
press CD•C
@
repeatedly until
“RADIO” appears in the display.
RDS function
This car audio system has been
equipped with an RDS radio receiver.
Many FM radio stations now transmit a
signal which contains such other infor-
mation as the station name along with
their regular programming. As soon as
the radio station name is detected, it will
appear in the display. The RDS func-
tion can be switched on or off.
Switching the RDS function on/off
➮
To take advantage of the RDS
function, press RDS
4
.
When the RDS function has been acti-
vated, the RDS symbol will light up in
the display.
Selecting the waveband/
memory bank
The car audio system is able to receive
FM and AM radio programs. There are
three memory banks for the FM wave-
band and one memory bank for the AM
waveband.
Up to six radio stations can be stored
on each of the memory banks.
➮
To switch between the FM memory
banks, press FM / TS
5
.
➮
To select the AM waveband, press
AM
?
.
VOLUME CONTROL RADIO OPERATION